CN 丨 EN
National Service Hotline:13790556503
Your current location:News >> Industry news >> Drowse
Common problem
Contact us
Contacts:Mr. Zhang
Mobile phone:13790556503
    13712742219
Tel:0769-81152520
Address:F3 Hongan Road, Wusha Caiwu Industrial Zone, Chang'an Town, Dongguan City
Industry news
How to Solve the Vibration of Grinding Wheel of Surface Grinder
Time:2019/1/22 15:35:30  Browse:times

Surface grinder jitter mainly has several problems:
1.If the balance of grinding wheel is not in place, slight jitter will occur during grinding, and regular ripple will occur on the surface of the workpiece.

2.The grinding wheel axle is loosened, the machine tool is used for too long, and the clearance of the axle increases due to wear, resulting in vibration lines during grinding.

3.Workbench loosening, left and right movement will produce jitter, will also cause the surface of the workpiece to produce ripples.

4.There is also a positioning behind the grinding wheel axle. I forgot what it is called. It is a bearing, which will cause ripple after wear and tear.

5.If the machine tool level is not well calibrated, the problem will arise in the bed with large worktable, and the small one will have little influence.


Copyright © 2019  Dongguan Lanyue Machinery Technology Co., Ltd.    Technical support:Easy access network

Online QQ
Mobile phone

Mobile phone

TOP